E boetse e tsejoa e le
- Polyurethane Iron Red Pente, Polyurethane Iron Red Anti-corrosion Primer, Polyurethane Iron Red Anti-corrosion Coating.
Litekanyetso tsa motheo
| Thepa e Kotsi No. | 33646 |
| UN No. | 1263 |
| Ho feto-fetoha ha motsoako oa lintho tse phelang | 64 e tloaelehileng m³ |
| Brand | Jinhui Pente |
| Mohlala | S50-1-1 |
| Mmala | Bofubelu ba tšepe |
| Ho kopanya karo-karolelano | Moemeli ea ka sehloohong: e phekolang =20:5 |
| Ponahalo | Sebaka se bataletseng le se boreleli |
Lisebelisoa
- Polyurethane iron red primer (Red polyurethane primer) e na le resin e nang le hydroxyl, iron oxide red, antirust pigmented filler, additives, solvents, joalo-joalo, le motsoako o mofubelu oa tšepe oa polyurethane o entsoeng ka polyisocyanate prepolymer.
Litšobotsi
- Thepa e ntle ea antirust.
- Ho khomarela ka mokhoa o babatsehang ho tšepe e tšoaroang.
- Phokotso e babatsehang ea mocheso o tlaase.
- E babatsehang ho hanyetsa metsi le kutu.
- Ho omisa kapele le ho hanyetsa oli e ntle.
Litekanyetso tsa tekheniki (karolo)
- Boemo ka har'a setshelo: ha ho na makukuno a thata ka mor'a ho hlohlelletsa le ho kopanya, boemong bo tšoanang
- Constructability: Ha ho tšitiso bakeng sa kopo
- Ponahalo ea filimi: e tloaelehileng
- Ho hanyetsa metsi a letsoai: ha ho na ho phunyeha, ha ho na ho phatloha, ha ho na peeling (index e tloaelehileng: GB/T9274-88)
- Ho hanyetsa asiti: ha ho na ho phunyeha, ha ho na maqeba, ha ho peeling (standard index: GB/T9274-88)
- Ho hanyetsa alkali: ha ho na ho phunyeha, ha ho na ho phatloha, ha ho na peeling (standard index: GB/T9274-88)
- Khanyetso ea ho kobeha: 1mm (Index e tloaelehileng: GB/T1731-1993)
- Nako ea ho omisa: ho omisa holim'a metsi ≤ 1h, ho omisa ka thata ≤ 24h (standard index: GB/T1728-79)
- Tšusumetso ea ho hanyetsa: 50cm (Standard index: GB/T4893.9-1992)
Lisebelisoa
- E loketse sebopeho sa tšepe, tanka ea oli, tanka ea oli, lisebelisoa tsa anticorrosion tsa lik'hemik'hale, lisebelisoa tsa motlakase, likoloi tsa lipalangoang joalo ka antirust priming coating.
Phekolo ea bokaholimo
- Ho phatloha ha lehlabathe ka holim'a tšepe ho ea ho sehlopha sa Sa2.5, ho hlaka ha holimo ho 30um-75um.
- Lisebelisoa tsa motlakase li theohela ho sehlopha sa St3.
Sephutheloana sa pele ho thupelo
- E pentiloe ka ho toba holim'a tšepe eo boleng ba eona ba ho tlosa mafome bo fihlang sehlopheng sa Sa2.5.
Ka mor'a ho lumellana
- Polyurethane mica pente, polyurethane pente, acrylic polyurethane top coat, fluorocarbon top coat.
Mekhahlelo ea kaho
- Botenya ba filimi bo khothalelitsoeng: 60-80um
- Tekanyetso ea maikutlo: e ka bang 115g/m² (e ipapisitse le filimi e omileng ea 35um, ntle le tahlehelo).
- Palo e sisintsoeng ea ho penta: Lipalo tse 2-3
- Mocheso oa polokelo: -10 ~ 40 ℃
- Mocheso oa kaho: 5 ~ 40 ℃
- Nako ea teko: 6h
- Mokhoa oa kaho: Brushing, ho fafatsa moea, ho roala ho ka ba.
- Nako ea ho penta:
Substrate mocheso ℃ 5-10 15-20 25-30
Nako e khuts'oane h48 24 12
Nako e telele ha e fete matsatsi a 7. - Mocheso oa substrate o lokela ho ba o phahameng ho feta phoka e fetang 3 ℃, ha mocheso oa substrate o le ka tlase ho 5 ℃, filimi ea pente ha e phekolehe, ha ea lokela ho hahoa.
Kaho ea ho penta
- Ka mor'a ho bula moqomo oa motsoako oa A, o tlameha ho ts'oaroa hantle, ebe o tšela karolo ea B ka karolo ea A tlas'a ho hlohlelletsa ho ea ka litlhoko tsa ho lekana, kopanya hantle, e tlohele e eme 'me u phehe bakeng sa 30mins, ebe u eketsa tekanyo e lekaneng ea thinner le ho fetola. ho ea ho viscosity ea kaho.
- Diluent: diluent e khethehileng bakeng sa letoto la polyurethane.
- Ho fafatsa ntle le moea: Chelete ea ho hlapolla ke 0-5% (ka tekanyo ea boima ba pente), caliber ea nozzle ke 0.4mm-0.5mm, khatello ea ho fafatsa ke 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Ho fafatsa moea: Chelete ea dilution ke 10-15% (ka tekanyo ea boima ba pente), caliber ea nozzle ke 1.5mm-2.0mm, khatello ea ho fafatsa ke 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ho roala ka rolara: Chelete ea dilution ke 5-10% (ho ea ka tekanyo ea boima ba pente).
Mehato ya tlhokomelo
- Ka kaho e phahameng ea nako ea mocheso, ho bonolo ho omisa spray, e le ho qoba spray e omileng e ka fetoloa ka thinner ho fihlela e sa omelle spray.
- Sehlahisoa sena se lokela ho sebelisoa ke litsebi tsa ho penta ho latela litaelo tsa sephutheloana sa sehlahisoa kapa bukana ena.
- Ho roala le ho sebelisoa ha sehlahisoa sena ho tlameha ho etsoa ho latela melao le litekanyetso tsohle tse amehang tsa bophelo bo botle, polokeho le tikoloho.
- Haeba u na le pelaelo ea hore na sehlahisoa sena se lokela ho sebelisoa, ka kopo ikopanye le lefapha la rona la litšebeletso tsa tekheniki bakeng sa lintlha.
