E boetse e tsejoa e le
- Polyurethane iron red primer, polyurethane iron red anti-corrosion primer, pente e khubelu ea tšepe ea polyurethane.
Litekanyetso tsa motheo
| Thepa e Kotsi No. | 33646 |
| UN No. | 1263 |
| Ho feto-fetoha ha motsoako oa lintho tse phelang | 64 e tloaelehileng m³ |
| Brand | Jinhui Pente |
| Mohlala | S50-1-3 |
| Mmala | Bofubelu ba tšepe |
| Ho kopanya karo-karolelano | Moemeli ea ka sehloohong: e phekolang =20:5 |
| Ponahalo | Sebaka se bataletseng le se boreleli |
Lisebelisoa
- Polyurethane (pu) iron oxide red anticorrosive coatings (Polyurethane (pu) iron oxide red anticorrosive coatings) e na le resin e nang le hydroxyl, iron oxide red, antirust pigmented fillers, additives, solvents, joalo-joalo, le likarolo tse peli tsa polyurethane iron oxide liphahlo tse khubelu tse thibelang ho bola tse nang le polyisocyanate prepolymer.
Litšobotsi
- Lintho tse ntle tsa antirust
- Ho khomarela hantle ho tšepe e tšoaroang
- Pheko e ntle ea mocheso o tlase
- E babatsehang ho hanyetsa metsi le kutu
- Ho omisa kapele le ho hanyetsa oli e ntle.
Litekanyetso tsa tekheniki (karolo)
- Constructability: Ha ho tšitiso bakeng sa kopo
- Ponahalo ea filimi: e tloaelehileng
- Ho hanyetsa metsi a letsoai: ha ho na ho phunyeha, ha ho na ho phatloha, ha ho na peeling (index e tloaelehileng: GB/T9274-88)
- Ho hanyetsa asiti: ha ho na ho phunyeha, ha ho na maqeba, ha ho peeling (standard index: GB/T9274-88)
- Boemo ka har'a setshelo: ha ho na maqeba a thata ka mor'a ho hlohlelletsa le ho kopanya, ka mokhoa o ts'oanang
- Khanyetso ea ho kobeha: 1mm (index e tloaelehileng: GB/T1731-1993)
- Tšusumetso ea ho hanyetsa: 50cm (Standard index: GB/T4893.9-1992)
- Ho hanyetsa alkali: ha ho na ho phunyeha, ha ho na ho phatloha, ha ho na peeling (standard index: GB/T9274-88)
- Nako ea ho omisa: ho omisa holim'a metsi ≤ 1h, ho omisa ka thata ≤ 24h (standard index: GB/T1728-79)
Phekolo ea bokaholimo
- Phekolo ea ho phatloha ha lehlabathe ka holim'a tšepe ho isa sehlopheng sa Sa2.5, bokhopo ba bokaholimo ba 30um-75um.
- Lisebelisoa tsa motlakase li theohela ho sehlopha sa St3.
Sephutheloana sa pele ho thupelo
- E pentiloe ka ho toba holim'a tšepe eo boleng ba eona ba ho tlosa mafome bo fihlang sehlopheng sa Sa2.5.
Ka mor'a ho lumellana
- Polyurethane mica pente, polyurethane pente, acrylic polyurethane top coat, fluorocarbon top coat.
Lisebelisoa
- E loketse sebopeho sa tšepe, litanka tsa oli, litanka tsa oli, lisebelisoa tsa anticorrosion tsa lik'hemik'hale, lisebelisoa tsa electromechanical, likoloi tsa lipalangoang e le li-antirust priming coating.
Kaho ea ho penta
- Karolo ka mor'a ho bula moqomo, e tlameha ho tsosoa hantle, ebe e hlohlelletsa ho ea ka litlhoko tsa proportioning tsa sehlopha sa B se tšeloa ka karolo ea A, e kopantsoe ka ho feletseng, e tsitsitseng, e phehiloeng 30min, eketsa tekanyo e nepahetseng ea thinner, e fetotsoeng ho viscosity ea kaho. .
- Diluent: diluent e khethehileng bakeng sa letoto la polyurethane.
- Ho fafatsa ntle le moea: Chelete ea ho hlapolla ke 0-5% (ka tekanyo ea boima ba pente), caliber ea nozzle ke 0.4mm-0.5mm, khatello ea ho fafatsa ke 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Ho fafatsa moea: Chelete ea dilution ke 10-15% (ka tekanyo ea boima ba pente), caliber ea nozzle ke 1.5mm-2.0mm, khatello ea ho fafatsa ke 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ho roala ka rolara: Chelete ea dilution ke 5-10% (ho ea ka tekanyo ea boima ba pente).
Mehato ya tlhokomelo
- Ka kaho e phahameng ea nako ea mocheso, ho bonolo ho omisa spray, e le ho qoba spray e omileng e ka fetoloa ka thinner ho fihlela e sa omelle spray.
- Sehlahisoa sena se lokela ho sebelisoa ke litsebi tsa ho penta ho latela litaelo tsa sephutheloana sa sehlahisoa kapa bukana ena.
- Ho roala le ho sebelisoa ha sehlahisoa sena ho tlameha ho etsoa ho latela melao le litekanyetso tsohle tse amehang tsa bophelo bo botle, polokeho le tikoloho.
- Haeba u na le pelaelo ea hore na sehlahisoa sena se lokela ho sebelisoa, ka kopo ikopanye le lefapha la rona la litšebeletso tsa tekheniki bakeng sa lintlha.
Polokelo ea Lipalangoang
- Sehlahisoa se lokela ho bolokoa sebakeng se phodileng le se nang le moea o pholileng, se sirelelitsoeng letsatsing le tobileng, 'me se arohane le mehloli ea ho khantša le ho bolokoa hole le mehloli ea mocheso sebakeng sa polokelo.
- Lihlahisoa li lokela ho sireletsoa puleng, mahlaseling a letsatsi le ho thulana ha li tsamaisoa, 'me li lokela ho latela melao e amehang ea lefapha la sephethephethe.
