Litlaleho tsa lihlahisoa
- Alkyd antirust pente, alkyd iron red anticorrosive primer, alkyd iron red paint, alkyd grey primer, alkyd anticorrosive primer.
Litekanyetso tsa motheo
| Lebitso la Senyesemane la sehlahisoa | Alkyd pente tšepe e khubelu |
| Lebitso la Sechaena la sehlahisoa | Pente e khubelu ea tšepe ea Alkyd |
| Thepa e Kotsi No. | 33646 |
| UN No. | 1263 |
| Ho feto-fetoha ha motsoako oa lintho tse phelang | 64 standard metres³. |
| Brand | Jinhui Pente |
| Mohlala No. | C52-1-3 |
| Mmala | Bofubelu ba tšepe, bohlooho |
| Ho kopanya karo-karolelano | Karolo e le 'ngoe |
| Ponahalo | Sebaka se boreledi |
Sebopeho sa sehlahisoa
- Alkyd primer e entsoe ka alkyd resin, iron oxide red, antirust pigmented filler, additives, No.200 solvent peterole le motsoako o motsoako, catalytic agent joalo-joalo.
Thepa
- Filimi ea pente e khahlanong le chalking, ts'ebetso e ntle ea tšireletso, khanya e ntle le ho boloka mebala, 'mala o khanyang, ho tšoarella hantle.
- Ho khomarela hantle, thepa e ntle ea mochine.
- Bokhoni bo botle ba ho tlatsa.
- Likahare tse phahameng tsa pigment, ts'ebetso e ntle ea sanding.
- E futsanehile ho hanyetsa solvent (peterole, joala, joalo-joalo), ho hanyetsa acid le alkali, k'hemik'hale ea lik'hemik'hale, lebelo la ho omisa butle.
- Ts'ebetso e ntle e ts'oanang, e kopantsoe hantle le seaparo sa alkyd top.
- Filimi e thata, ho koaloa hantle, ts'ebetso e ntle ea anti-rust, e ka mamella phello ea phapang ea mocheso.
- Ts'ebetso e ntle ea kaho.
Tšebeliso
- E loketse libaka tsa tšepe, bokaholimo ba mochini, bokaholimo ba liphaephe, lisebelisoa tsa lisebelisoa, bokaholimo ba lepolanka; alkyd primer e ka sebelisoa e le primer ea alkyd magnetic pente e nang le litlhoko tse phahameng tsa mokhabiso, tse loketseng lehong le holim'a tšepe; alkyd primer e sebelisoa feela e le setsi se bapisang sa lipente tse khothaletsoang tsa alkyd le lipente tsa nitro, lipente tsa asphalt, lipente tsa phenolic, joalo-joalo, 'me e ke ke ea sebelisoa e le pente e ts'oanang ea antirust ea lipente tse nang le likarolo tse peli le lipente tse matla tse qhibilihang.
Litekanyetso tsa tekheniki: GB/T 25251-2010
- Boemo ka har'a setshelo: ha ho na maqeba a thata ka mor'a ho hlohlelletsa le ho kopanya, ka boemo ba homogeneous.
- Bokhabane: ≤50um (lintlha tse tloaelehileng: GB/T6753.1-2007)
- Ho hanyetsa metsi a letsoai: 3% NaCl, 24h ntle le ho phunyeha, ho phunyeha kapa ho senya (Standard index: GB / T9274-88)
- Nako ea ho omisa: ho omisa holim'a metsi ≤ 5h, ho omisa ka thata ≤ 24h (standard index: GB/T1728-79)
Phekolo ea bokaholimo
- Ho phatloha ha lehlabathe ka holim'a tšepe ho ea ho sehlopha sa Sa2.5, ho hlaka ha holimo ho 30um-75um.
- Lisebelisoa tsa motlakase li theohela ho sehlopha sa St3.
Ho bapisa tsela e ka pele
- Ka ho toba penta holim'a tšepe eo mafome ho tloswa boleng fihla Sa2.5 sehlopheng.
Tšebelisano ea morao-rao
- Pente ea alkyd mica, pente ea alkyd.
Kaho ea ho penta
- Thinners: khethehileng thinners bakeng sa alkyd letoto.
- Ka mor'a ho bula moqomo, o tlameha ho tsosoa ka mokhoa o ts'oanang, o tlohele ho ema le ho hōla ka metsotso e 30, ebe o eketsa tekanyo e loketseng ea thinner le ho ikamahanya le viscosity ea kaho.
- Ho fafatsa ntle le moea: palo ea dilution ke 0-5% (karolong ea boima ba pente), caliber ea nozzle ke 0.4mm-0.5mm, 'me khatello ea ho fafatsa ke 20MPa-25MPa (200kg/cm²-250kg/cm²) .
- Ho fafatsa moea: Chelete ea dilution ke 10-15% (ka tekanyo ea boima ba pente), caliber ea nozzle ke 1.5mm-2.0mm, khatello ea ho fafatsa ke 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ho roala ka rolara: Chelete ea dilution ke 5-10% (ka tekanyo ea boima ba pente).
Sephutheloana
- 25kg moropa
Mehato ya tlhokomelo
- Ka kaho e phahameng ea nako ea mocheso, ho bonolo ho omisa spray, e le ho qoba spray e omileng e ka fetoloa ka thinner ho fihlela e sa omelle spray.
- Sehlahisoa sena se lokela ho sebelisoa ke litsebi tsa ho penta ho latela litaelo tsa sephutheloana sa sehlahisoa kapa bukana ena.
- Ho roala le ho sebelisoa ha sehlahisoa sena ho tlameha ho etsoa ho latela melao le litekanyetso tsohle tse amehang tsa bophelo bo botle, polokeho le tikoloho.
- Haeba u na le pelaelo ea hore na sehlahisoa sena se lokela ho sebelisoa, ka kopo ikopanye le lefapha la rona la litšebeletso tsa tekheniki bakeng sa lintlha.
Lipalangoang le polokelo
- Sehlahisoa se lokela ho bolokoa sebakeng se phodileng le se nang le moea o pholileng, se sirelelitsoeng letsatsing le tobileng, 'me se arohane le mehloli ea ho khantša le ho bolokoa hole le mehloli ea mocheso sebakeng sa polokelo.
- Lihlahisoa li lokela ho sireletsoa puleng, mahlaseling a letsatsi le ho thulana ha li tsamaisoa, 'me li lokela ho latela melao e amehang ea lefapha la sephethephethe.
Tšireletso ea Tšireletso
- Sebaka sa kaho se lokela ho ba le lisebelisoa tse ntle tsa moea, 'me baetsi ba litšoantšo ba roale likhalase, liatlana, limaske, joalo-joalo ho qoba ho kopana ha letlalo le ho hema moholi oa pente.
- Ho tsuba le mollo ho thibetsoe ka thata setšeng sa kaho.
